Trident filters are a highly efficient dynamic rainwater filter, ensuring that a maximum volume of water passes through the filter and into the tank. The filter acts as the first step in the rainwater treatment process and has the capability to reduce the overall lifetime cost of the entire rainwater harvesting system. With a range of pre-tank filters and tank filters with skimmers, Trident filters are flexible to suit in almost any tank; improving tank life, reducing maintenance and capable of handling high volume harvesting needs. • +90% Efficiency 700μm • Rapid separation of waste and clean water • Dirt resistant and large effective filter grid • Automatic cleaning reduces maintenance required • Ideal for rainwater harvesting
Trident basement filter
Description
Application Area
The Trident basement filter is meant to be attached to the ceiling. The Trident basement filter is suitable for filtering rain water from roofs of homes or buildings with a roof surface up to 150 m2 (based on 300 litres/sec/ha). The basement filter has a connecting diameter of Ø 110 and is provided with mounting brackets. The Trident basement filter must be attached above ground level, hanging from the ceiling or brackets. The filter box is detachable for the purpose of inspecting the filter plate.
Options
Nozzle set for Trident 150, 325 and 450 tank filter.
Allows easy and automatic cleaning of the filter. The nozzle cleans the filter surface by means of water pressure via a special powerful brass cone nozzle (see 1).
Automatic time-controlled filter cleaner 1/2 ‘’. Time-controlled filter cleaner makes automatic filter cleaning possible. The nozzle sprays the filter surface at freely adjustable times clean.
Fine filter bag
The fine filter bag can be placed under the Trident filter plate. The fine filter bag filters very finely to a mesh size of 150 μm. This fine filter can be used in places where high demands are placed on the water quality. (see 2)
Backflow alarm for Trident filters
The filter can be equipped with an alarm sensor that flows back from the overflow signals. This alarm sensor can be connected on an IRM rainwater system that switches to drinking water as an alarm signal comes from the sensor. This will contaminate sanitary appliances, pump and pipes (see 3).
Rat valve stainless steel
Stainless steel rat valve can be used in the Trident 150 and 325 tank filter be edited. Prevents ingress of vermin from the overflow to sewer or surface water.
Check valve for Trident 150 tank filter
Valve to place behind the filter in the drain. Plug-in model, suitable for 110 mm pipe pieces. Reduced the risk of backstopping from the overflow towards the tank. Material polypropylene black, provided of flexible rubber
lining.
Technical Overview
Delivery
Product consists of: filter housing, filterbox, rubber cuff, Trident filter grill and installation instructions.
Order Details
Art nr – NAME (PG)
401126 – Trident 150 basement filter (2)
401151 – Nozzle set for Trident 150, 325 and 450 tank filter (2)
401155 – Automatic time-controlled filter cleaner 1/2’’ (2)
401157 – Fine filter bag (2)
401162 – Trident 150 click connection set 110 mm (2)
401158 – Backflow alarm for Trident filters (2)
401165 – Check valve for Trident 150 tank filter (2)
Additional information
| Weight | 3.2 kg |
|---|---|
| Height in mm: | 335 mm |
| Width in mm: | 231 mm |
| Length in mm: | 801 mm |
| Height difference of the supply in mm: | 20 mm |
| Connection waste water in/out in mm: | 110 mm |
| Clean water out in mm: | 110 mm |
| Opening with cover in cm: | 27 x 16 cm |
| Material housing: | PE |
| Material filter grid: | RVS |
| Connection filter cleaner (optional): | 1/2” |
| Necessary space above filter in mm: | 210 mm |
Related products
-
GEP has developed a unique filter shaft; the ‘Trident tank filter shaft’. The filter shaft is applicable for all tanks made of plastic and concrete rain water boreholes of GEP. The concept is the result of 15 years of engineering, recruiting and practical experience. The unique Trident tank filter shaft of GEP has the following properties and advantages:
– The Trident tank filter shaft scoveres over the synthetic manhole of the tank or concrete pit and is mounted with rubber grommets to realise an optimal sealing. It is a simple and time-saving solution, making the
usage of kit, welds or mortar something of the past.
– The sawable and telescopic shafts will instantly prove to be beneficial! The laborious placing of and/or masonry work on a manhole is no longer required. These shafts can be sawn or raised in no time.
– In addition, the shaft can be rotated against the tank, due to which fewer connection pieces are required.
– The shafts are extendable with extra connections, that can be quickly and easily applied.
– The cover is, subsequently, telescopic compared to the inner shaft. This way the cover can be precisely equated to the ground level. This can also be done at a later stage of the construction, when ultimately the garden is being created. This again will save you some fitting pieces, thus time and money.
– The cover set is rotatable against the shaft and the tank. During finishing applying grouting in paving, the joints can thus always be followed perfectly. This can also be lightly tilted to realise a perfect finish on slopes.
In short: the ‘Trident tank filter shaft’ with accompanying covers offers a telescopic, rotatable and extendable option that can be shortened. The extensive assortment of fitting covers offers an “invisible” and childproof covering for any situation. -
Trident filters are a highly efficient dynamic rainwater filter, ensuring that a maximum volume of water passes through the filter and into the tank. The filter acts as the first step in the rainwater treatment process and has the capability to reduce the overall lifetime cost of the entire rainwater harvesting system. With a range of pre-tank filters and tank filters with skimmers, Trident filters are flexible to suit in almost any tank; improving tank life, reducing maintenance and capable of handling high volume harvesting needs. • +90% Efficiency 700μm • Rapid separation of waste and clean water • Dirt resistant and large effective filter grid • Automatic cleaning reduces maintenance required • Ideal for rainwater harvesting
-
Trident filters are a highly efficient dynamic rainwater filter, ensuring that a maximum volume of water passes through the filter and into the tank. The filter acts as the first step in the rainwater treatment process and has the capability to reduce the overall lifetime cost of the entire rainwater harvesting system. With a range of pre-tank filters and tank filters with skimmers, Trident filters are flexible to suit in almost any tank; improving tank life, reducing maintenance and capable of handling high volume harvesting needs. • +90% Efficiency 700μm • Rapid separation of waste and clean water • Dirt resistant and large effective filter grid • Automatic cleaning reduces maintenance required • Ideal for rainwater harvesting
-
Trident filters are a highly efficient dynamic rainwater filter, ensuring that a maximum volume of water passes through the filter and into the tank. The filter acts as the first step in the rainwater treatment process and has the capability to reduce the overall lifetime cost of the entire rainwater harvesting system. With a range of pre-tank filters and tank filters with skimmers, Trident filters are flexible to suit in almost any tank; improving tank life, reducing maintenance and capable of handling high volume harvesting needs. • +90% Efficiency 700μm • Rapid separation of waste and clean water • Dirt resistant and large effective filter grid • Automatic cleaning reduces maintenance required • Ideal for rainwater harvesting
